CAPACITIVE TOUCH DIMMER LED DIMMER PWM CONTROL SWITCH MODULE

The default function of the capacitor touch dimmer is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoids the stimulation to the eyes. The lamp brightness can be adjusted by requirement, it is very to operate. It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.

• • (LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area
  • The copper skin area should be 2x3cm.
  • T1=1, T2=1: Without brightness memory, suddenly light and off LED touch Stepless dimming function.
  • T1=0, T2=1: Without brightness memory, gradually light and off LED touch Stepless dimming function.
  • T1=1, T2=0: With brightness memory, gradually light and off LED touch Stepless dimming function.
  • T1=0,T2=0:LED three sections touch dimmer function.

Operating Voltage: 2.4 ~ 4.5VDC The lamp brightness can be adjusted by requirement, it is very to operate. It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe. Simple applied circuit, fewer peripheral devices, easy processing, low cost.
Anti-power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference. Install: Needn’t to touch copper foil directly, the dimming can be processed across the acrylic glass(above 3mm) or plastic.

Application:

• • It can control LED module
  • light and so on. It is available for indoor LED
  • lighting lamp
  • DIY automotive lights dimming refit.

Package Includes:

• • 1 x Capacitive Touch Dimmer Constant Voltage LED Stepless Dimming PWM Control Board Dimming Switch Module