Roll over image to zoom in
OPTICAL FINGERPRINT READER
₹999.00
You save
Optical fingerprint / biometeric sensor module – FPM10A with TTL/UART interface with full firmware support and a windows fingerprint capture software.
Applications
- Biometric Identification
- Security systems
- Identification systems
- Electronic Voting Systems
- Que management systems
- Mobile SIM issuing systems
Technical Specifications
- Power supply voltage: DC 3.6~6.0V
- Supply current: working current: <120mA
- Peak current: <140mA
- The time of fingerprint image input: < 1 seconds
- The window size: 14 x 18 mm
- Profile: 256 bytes
- Template file: 512 bytes
- Storage capacity: 1000
- False accept rate (FAR): < 0.001% (safety grade 3)
- FRR (FRR): < 1% (safety grade 3)
- The search time: < 1 seconds (1:500, mean)
- Computer interface: UART (TTL logic level)
- The communication baud rate (UART): (9600 x N) BPS where N=1 ~ 12 (the default value of N=6, namely 57600bps)
- Working environment: temperature: -20°C to +50°C
- Relative humidity: 40%RH to 85%RH (no treatment)
- Storage conditions: temperature: -40°C to +85°C
- Relative humidity: < 85%H (no treatment)
- Dimensions (L * W * H): 56 x 20 x 21.5mm
Pinouts:
- VCC (RED)
- GND (BLACK)
- RXD (YELLOW)
- TXD (GREEN)
Notes:
Remove cable and under the connector you should find pin 1 mark. GND pin should have 0 ohms resistance with on board tantalum capacitors negative terminal.
Additional information
Weight | 15 g |
---|---|
Dimensions | 18 × 18 × 45 mm |
INPUT VOLTAGE | 3.3 to 5v |
BACKLIGHT | RED |
WIRE LENGHT | 10Cm |
Reviews
There are no reviews yet.