The LM2596S DC-DC Buck Converter Adjustable Power Supply is a step-down voltage regulator module that enables efficient voltage conversion from a higher input voltage to a lower, regulated output. Based on the LM2596S switching regulator IC, this module is widely used in battery-powered systems, DIY electronics, and power management applications due to its high efficiency, compact design, and adjustable output range.
Key Features of LM2596S DC-DC Buck Converter:
- Wide Input Voltage Range: Operates between 4V to 40V DC input.
- Adjustable Output Voltage: Output voltage can be set from 1.25V to 35V.
- High Efficiency: Up to 92% efficiency with low heat generation.
- Built-in Output Short Protection: Protects circuit from overload conditions.
- Compact Size: Suitable for space-constrained embedded applications.
Technical Specifications of LM2596S DC-DC Buck Converter:
- Input Voltage Range: 4V – 40V DC
- Output Voltage Range: 1.25V – 35V DC (adjustable via trimpot)
- Output Current: Rated up to 2A, maximum 3A (with heatsink)
- Conversion Efficiency: Up to 92% (depending on input/output voltage and load)
- Switching Frequency: 150kHz
- Output Ripple: Approximately 30mV (typical)
- Load Regulation: ±0.5%
- Voltage Regulation: ±0.5%
Mechanical Specifications of LM2596S Module:
- Module Dimensions: 43mm x 21mm x 14mm (LxWxH)
- Weight: Approx. 12 grams
- Heatsink Provision: Yes, for higher current applications
- Mounting Holes: No mounting holes on standard module
Dimensions:
- Length: 43mm
- Width: 21mm
- Height: 14mm (with components)
Mounting Options:
- Soldered Mount: Directly solderable to PCB or perf board
- Inline Wiring: Can be wired using screw terminals or header pins
Schematic Diagram, Connection, Wiring and Pinout of LM2596S Module:
- IN+ : Positive input voltage
- IN- : Ground input
- OUT+ : Positive regulated output
- OUT- : Ground output
- Adjustment: Use potentiometer to fine-tune output voltage
Datasheet of LM2596S Buck Converter IC:
Applications of LM2596S DC-DC Buck Converter Module:
- Battery-Powered Devices: Step down voltage to required level
- Arduino/Raspberry Pi Projects: Provide stable supply for boards
- LED Drivers: Power high-brightness LEDs with regulated current
- Solar Power Systems: Step down solar panel voltage
- DIY Electronics: General-purpose voltage regulator for custom circuits
Equivalent of LM2596S Buck Converter Module:
- MP1584: Compact DC-DC converter with 3A output and 1MHz switching
- XL4015: High-power buck converter with up to 5A output
- LM2576: Similar switching regulator with slightly lower frequency
- AMS1117: Linear voltage regulator (low efficiency but compact)
Package Includes:
- 1 x LM2596S DC-DC Buck Converter Adjustable Power Supply Module
Additional information
Weight | 10 g |
---|---|
Dimensions | 45 × 20 × 12 mm |
Reviews
There are no reviews yet.