JF-0530B DC 12V 300mA 10mm 5N Push Pull Solenoid Electromagnet

JF-0530B Solenoid Electromagnet is a powerful and reliable actuator, essential for projects requiring quick, automated linear motion. Operating on a DC 12V supply, this miniature solenoid employs a push-pull mechanism, which provides the flexibility to either extend or retract a plunger to perform a specific action. Engineers and DIY enthusiasts utilize this module for its combination of small size, significant force (5 Newtons), and a relatively long stroke of 10mm. This electromagnet quickly converts electrical energy into mechanical work, making it a foundational component in automation, locking mechanisms, and vending machine design.

Key Features:

• Push-Pull Operation: You can use this solenoid in either a push (extending) or pull (retracting) configuration, depending on how you mount it and connect the plunger.
• High Actuation Force: Delivers a maximum force of 5 Newtons (5N) at the start of its stroke, ensuring reliable operation for mechanical tasks.
• Long Linear Stroke: Offers a 10mm travel distance, which is sufficient for many common locking, sorting, or ejecting mechanisms.
• Low Power Consumption: It only draws approximately 300mA at 12V DC, making it efficient for battery-powered or continuous-duty applications.
• Fast Response Time: The solenoid actuates quickly when power is applied, providing rapid mechanical control.
• Durable Design: The open-frame construction and robust plunger design ensure a long operational lifespan.

Technical Specifications:

• Model: JF-0530B
• Operating Voltage: DC 12V
• Current Consumption: ~300mA (at DC 12V)
• Actuation Type: Push-Pull, Open-Frame
• Force (Holding/Initial): Approximately 5N (0.5 kg) at 0mm stroke
• Rated Stroke: 10mm
• Duty Cycle: Intermittent (Short-time duty is recommended to prevent overheating)

Mechanical Specifications:

• Frame Material: Metal/Steel Open Frame
• Plunger Tip: Threaded M3 (often used for attaching custom linkages)
• Mounting: Two screw holes on the frame for secure installation.
• Connector: Two lead wires (red and black) for electrical connection.

Dimensions:

• Frame Length: ~30 mm
• Frame Width: ~15 mm
• Frame Height: ~14 mm
• Total Length (with Plunger Retracted): ~42 mm

Pinout and Wiring:

• Red Wire (+): Connect the positive pole of your 12V DC power supply.
• Black Wire (-): Connect the negative pole (GND) of your 12V DC power supply.
• Wiring Note: This solenoid is not polarity sensitive for basic operation, but always connect it via a transistor (like a MOSFET or BJT) and a flyback (freewheeling) diode to protect your control circuit (e.g., Arduino) from voltage spikes when the power turns off.

Datasheet Reference:

• Download Datasheet

Commonly Used in:

• Security Systems: Employed in electric door locks and bolt-action mechanisms.
• Vending Machines: Used for coin sorting, dispensing products, and actuator control.
• Office Equipment: Found in printers, copiers, and sorting devices for paper handling.

Applications:

• Automated Locking: Create simple, electrical latch mechanisms for boxes or doors.
• Robotics: Use it as an actuator for gripping or triggering small mechanical components.
• DIY Projects: Build mechanisms like pet feeders, automatic dispensing units, or pinball machine kickers.

Equivalent Models:

• JF-0520B: A model with a shorter 5mm stroke but often similar force.
• Push-Pull Tubular Solenoids: Offer a more enclosed, cylindrical form factor, usually at a higher cost.

Package Includes:

• 1 x JF-0530B DC 12V Push Pull Solenoid Electromagnet