FQP27P06 60V 27A P-Channel Power MOSFET TO-220
Save 67% ₹40.00₹120.00
You save
FQP27P06 60V 27A P-Channel Power MOSFET (TO-220) provides robust P-channel switching for power designs. Engineers use it for high-current reverse-side switching, polarity protection, and P-channel load control where a -60 V rating and low RDS(on) matter.
Key Features:
- -60 V Drain-Source Rating: Supports up to 60 volts for common power-rail applications.
- High Continuous Current: Handles up to 27 A (at TC), enabling high-current switch duties.
- Low On-Resistance: RDS(on) typically ≤ 70 mΩ at VGS = -10 V for efficient conduction.
- TO-220 Through-Hole Package: Provides easy heatsinking and PCB mounting for power assemblies.
- Low Gate Charge: Small Qg reduces switching losses and eases gate drive requirements.
- High Avalanche Energy: Designed for robust pulse and avalanche performance.
Technical Specifications:
- Drain-Source Voltage (VDSS): −60 V (P-channel)
- Continuous Drain Current (ID): −27 A (at TC)
- On-Resistance (RDS(on)): ≤ 70 mΩ max @ VGS = −10 V, ID = −13.5 A
- Gate Threshold (VGS(th)): Typical around −2 V, up to −4 V (at ID = −250 µA)
- Total Gate Charge (Qg): Typ ~33 nC
- Reverse Transfer Capacitance (Crss): Typ ~120 pF
- Operating Junction Temperature: Up to +175 °C
- Gate-Source Voltage Range (VGS): ±25 V
Mechanical Specifications:
- Package: TO-220-3 through-hole with insulated or non-insulated tab variants depending on supplier
- Mounting: PCB through-hole and screw or clipable heatsink to tab
- Lead Finish: Tin-plated leads for reliable soldering and shelf life
- Body Material: Molded epoxy suitable for standard power semiconductors
Dimensions:
- Typical TO-220 Body: ~10.0 mm wide × ~15.0 mm tall (body only)
- Lead Pitch and Length: Standard TO-220 lead spacing; leads sized for standard through-hole PCBs and soldering
Pinout and Wiring:
- Pin 1 (left): Gate – drive with appropriate negative gate voltage for P-channel switching
- Pin 2 (middle): Drain – tab also connected to drain, mount to heatsink if needed
- Pin 3 (right): Source – connect to load or supply depending on topology
- Wiring Note: Include gate resistor and pull-down, add flyback diode for inductive loads
Datasheet Reference:
- Download the official FQP27P06 datasheet from onsemi or Fairchild for full specifications and application circuits
Applications:
- High-Side P-Channel Switching: Suitable for circuits needing negative gate drive
- Polarity Protection: Use for reverse polarity blocking and ideal diode designs
- Motor and Power Control: Works in DC motor drivers, power rails, and load switching
- Audio and SMPS: Integrates into amplifier protection and switched-mode power supplies
Equivalent Models:
- IRF9540N: P-Channel MOSFET with similar ratings
- STP55PF06: Alternative with higher current capacity
- FQP27P06L: Logic-level gate drive variant
Package Includes:
- 1 x FQP27P06 P-Channel Power MOSFET (TO-220)
Additional information
Weight | 25 g |
---|
Reviews
There are no reviews yet.