CJMCU 74HC4051 8-CHANNEL ANALOG MULTIPLEXER MODULE

74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer / demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors
to interface inputs to voltages in excess of VCC.

Features:

• • Wide analog input voltage range from -5 V to +5 V.
  • The low on-resistance has three typical value of different VEE.
  • Logic level conversion: enables 5 V logic to communicate with ±5 V analog signal.
  • ESD protection: HBM JESD22-A114F exceeds 2000 V; MM JESD22-A115-A exceeds 200 V; CDM JESD22-C101E exceeds 1000 V.
  • The HC4051A8 is a single-pole, eight-throw analog switch (SP8T) for analog or digital 8:1 multiplexer/demultiplexer applications.
  • The switch has three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), one common input/output (Z) and one digital enable input (E).
  • When E is high, the switch is turned off. The input includes a clamp diode. This enables the use of a current limiting resistor to connect the input to a voltage that exceeds VCC.

Applications:

• • Breadboard
  • Suitable For MEGA2560
  • MCU ARM AVR ADC
  • Raspberry Pi
  • PLC RS485
  • Analog Acquisition
  • Analog Multiplexing And Demultiplexing
  • Digital Multiplexing And Demultiplexing
  • Signal Gating

Package Includes:

• • 1 X CJMCU 74HC4051 8 Channel Analog Multiplexer Demultiplexer Breakout Board for Arduino