AP2112K-3.3TRG1 3.3V 600mA Linear Voltage Regulator IC SOT-23-5
₹14.00
You save
AP2112K-3.3TRG1 3.3V 600mA Linear Voltage Regulator IC (SOT-23-5) delivers a stable 3.3 V output for space-constrained power rails. Designers deploy it in sensors, MCUs, and wireless modules that need low dropout, low noise, and simple enable control.
Key Features:
- Fixed 3.3 V Output: Regulates logic rails and RF modules with tight tolerance.
- 600 mA Output Current: Drives moderate loads with reliable thermal protection.
- Low Dropout: Minimizes headroom at high load for battery-powered designs.
- Low Quiescent Current: Extends battery life in always-on systems.
- Enable Pin: Supports logic-controlled on/off for power sequencing.
- Thermal Shutdown & Current Limit: Protects against overload and overheating.
- Stable with Ceramic Capacitors: Works with small, low-ESR MLCCs at input and output.
Technical Specifications:
- Output Voltage: 3.3 V fixed
- Output Current: Up to 600 mA
- Input Voltage Range: ~2.3 V to 6.0 V (check datasheet for absolute limits)
- Dropout Voltage: Typically a few hundred mV at full load (refer to curves)
- Quiescent Current: Low IQ for battery use (typical value per datasheet)
- PSRR: High at low-to-mid frequencies for clean rails
- Protection: Current limit, short-circuit, and thermal shutdown
- Operating Temperature: −40 °C to +85 °C ambient (verify grade)
Mechanical Specifications:
- Package: SOT-23-5 (5-pin, small-outline transistor)
- Mounting: Surface-mount, reflow compatible
- Lead Finish: Matte-tin plated leads
- Body Material: Molded epoxy, RoHS compliant
Dimensions:
- Package Body: ~2.9 mm × ~1.6 mm
- Height: ~1.1 mm max
- Lead Pitch: 0.95 mm
- Recommended Pads: Follow manufacturer land pattern for SOT-23-5
Pinout and Wiring:
- Pin 1: GND – connect to system ground with solid return.
- Pin 2: EN – drive high to enable; pull low to disable. Tie to IN for always-on.
- Pin 3: IN – connect to supply; place a 1 µF (or higher) ceramic capacitor close to the pin.
- Pin 4: OUT – regulated 3.3 V output; place a 1 µF (or higher) ceramic capacitor close to the pin.
- Pin 5: BP/NC – on fixed versions, use as BYP for noise reduction with ~10 nF to GND if available; otherwise leave NC (check datasheet).
- Route short, wide traces for IN and OUT. Keep bypass and output capacitors close to the device.
Datasheet Reference:
- Search for “AP2112K-3.3TRG1 datasheet” from Diodes Incorporated to view full electrical characteristics, dropout curves, PSRR plots, and recommended layout.
Applications:
- MCU and Sensor Rails: Power 3.3 V logic and analog front-ends.
- Wireless and IoT Modules: Regulate BLE, Wi-Fi, and LoRa nodes.
- Battery-Powered Systems: Support wearables, handhelds, and portable instruments.
- Post-Regulation: Clean up switching-converter rails for sensitive loads.
Equivalent Models:
- MCP1703A-3302: 3.3 V LDO with low quiescent current (verify current rating and dropout).
- TLV70033: Compact 3.3 V LDO for light-to-moderate loads.
- XC6206P332MR: 3.3 V SOT-23 LDO alternative; confirm load capability.
Package Includes:
- 1 x AP2112K-3.3TRG1 Linear Voltage Regulator IC (SOT-23-5)
Additional information
Weight | .1 g |
---|
Reviews
There are no reviews yet.