915Mhz 100mW TELEMETRY KIT FOR FPV DRONE

This is a 915Mhz 100mW Radio Telemetry Kit that is based on the 3DR Telemetry kit and is 100% compatible as it runs the same firmware onboard. This firmware used by 3D Robotics is completely open-source which is, of course, the reason we are able to use it on our own version at Unmanned Tech.
The Unmanned Telemetry Kit is compatible with Ardupilot or Pixhawk-based systems and allows you to easily add a two-way telemetry connection between your drone and ground station. This product comes with our full support and warranty as we are confident in the functionality and reliability of this item.

The wiring is complete, and the independent housing is added. It is safer and more beautiful. The data transmission is more stable. It does not distinguish between the ground end and the air end. The two pieces are exactly the same, all with USB, and 6pin serial port dual TTL design, don’t need to use any tools, users can upgrade firmware by themselves.

The full features and specifications are listed below but the main features are that both air and ground modules are now interchangeable, and each is with a USB connector and a DF13 connector. Please note that to connect to Pixhawk, it is a good idea to also purchase a 6-pos to 6-pos cable as this is easier and better than using the cable included.

• •  915MHZ
  • Support MWC / APM / PX4 / Pixhawk other open-source flight control
  •  MAVLink Framework Agreement
  •  Open Source Firmware Frequency-hopping spread spectrum (FHSS)
  •  2-way full-duplex communication adaptive TDM
  • Up to 25% can be corrected bit errors
  • Based on Si1000 and Si4432 wireless microcontroller modules.
  • Demonstrated range of several kilometers with a small omni antenna
  • Can be used with a bi-directional amplifier for even more range
  • MAVLink protocol framing and status reporting
  • Frequency hopping spread spectrum (FHSS)
  • Adaptive time division multiplexing (TDM)
  • Support for LBT and AFA
  • Configurable duty cycle
  • Built in error correcting code (can correct up to 25% data bit errors)
  • Open source firmware
  • AT commands for radio configuration
  • RT commands for remote radio configuration
  • Adaptive flow control when used with APM