PIC16F877A Microcontroller

This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F877A features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.

• Microchip PIC 16F877A (with 20 MHz Crystal Oscillator & Boot loader Software)
• High Performance RISC CPU
• 8 K Words Programmable Flash Memory
• 368 bytes Data Memory (RAM)
• 256 bytes EEPROM
• 20 MHz Operation (200ns instruction cycle)
• 33 I/O pins
• 8-Channel 10-bit Analog to Digital Converter (ADC)
• Two PWM Channels
• Two Capture modules (16-bit with max. resolution 12.5 ns)
• Two Compare modules (16-bit with max. resolution 200 ns)
• Two 8-Bit Timer/Counter
• One 16-Bit Timer/Counter
• One Serial USART
• One Master Synchronous Serial Port (MSSP)
• One Serial Peripheral Interface(SPI) Module
• One Inter-Integrated Circuit (I2C) Module
• Power-On Reset (POR), Power-Up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Interrupt Capability (up to 14 sources)
• Eight Level Deep Hardware Stack
• ICSP Programming
• Brown Out Reset
• Low Voltage Programming
• Power Saving Sleep Mode
• Programmable Code Protection
• Fully Static Design
• Wide Operating Voltage 2.0V to 5.5V
• Low Power Consumption